Precompiled OpenCV 3 libraries for Raspberry Pi 2

Hi, searched through the internet I was unable to find precompiled libraries od Qt 5.5, openCV and pyqt5 for my raspberry pi 2. So I decided to put these on the net for anyone, who needed for them and not much time to compile or at least tried with failure.

I use the configure command below to compile it. Note that this is statically compiled with -DBUILD_SHARED_LIBS=OFF option.

cmake -DCMAKE_BUILD_TYPE=RELEASE \
-DCMAKE_INSTALL_PREFIX=/usr/local/opencv3 \ 
-DBUILD_PERF_TESTS=OFF -DBUILD_opencv_gpu=OFF \
-DBUILD_opencv_ocl=OFF -DBUILD_SHARED_LIBS=OFF

Here I put statically configured and compiled binaries of openCV 3 for raspberry pi 2 as it does not exist on the internet and takes ~5 hours to compile on raspberry. Next step i will try to create deb file for this.
To install this just extract the file and run

sudo make install

You will find the library in /usr/local/opencv3
just to be make sure your system is ready to use installed library use ldconfig command.

Follow me to get next compiled libraries or deb filed I am planning to generate.

Note: I will try to generate deb file for this library and put it here as well but it is appreciated (and anyone encouraged) if anyone do this and share with us 😉

>>>Download precompiled Opencv3 static library for Raspberry Pi2(tar.gz)<<<
>>>Download precompiled Opencv3 static library for Raspberry Pi2(tar.gz)<<<
Reklamlar

Bir Cevap Yazın

Aşağıya bilgilerinizi girin veya oturum açmak için bir simgeye tıklayın:

WordPress.com Logosu

WordPress.com hesabınızı kullanarak yorum yapıyorsunuz. Çıkış  Yap / Değiştir )

Twitter resmi

Twitter hesabınızı kullanarak yorum yapıyorsunuz. Çıkış  Yap / Değiştir )

Facebook fotoğrafı

Facebook hesabınızı kullanarak yorum yapıyorsunuz. Çıkış  Yap / Değiştir )

Google+ fotoğrafı

Google+ hesabınızı kullanarak yorum yapıyorsunuz. Çıkış  Yap / Değiştir )

Connecting to %s